Rivet nut is a fastener that has been widely used in recent years. Its appearance has replaced some traditional welding processing methods in a certain range. The Rivet nut is just the way to solve the connection between some equipment that is difficult to weld and other parts. The use of Rivet nut requires the use of rivet nut guns, such as manual rivet nut guns. Before using a manual nut riveting gun, the following issues need to be noted.
1. First, check if the nozzle screw is correctly assembled. Select the corresponding gun head and rivet bolt according to the size of the rivet nut, and check whether the connection components are securely connected.
2. Pay attention to the deformation length or displacement of the riveted nut, and then adjust the operating lever angle correctly.
3. The scale ring of the riveting nut gun is used to adjust the riveting stroke, which can be adjusted according to needs during operation. It is worth noting that when adjusting the length of the riveting bolt, it is necessary to open the two handles and adjust the gun head sleeve. The exposed length of the riveting bolt should be slightly longer than the length of the riveting nut. Finally, the adjusting nut and the gun body should be tightened together.
4. Finally, open both hands and pull out all the glue wood. Place the corresponding rivet nuts on the end of the rivet bolt and pinch them firmly. Push the glue wood to screw on the gun head bolt. Then pierce the rivet nut into the pre drilled hole of the riveted part, press the two handles together with force. At this moment, the rivet nut will expand to rivet the workpiece tightly, and then pull out the glue wood ball. The Rivet nut will exit from the threaded hole. The device that can complete the Rivet nut.
We provide relevant high-quality products, welcome to consult
Post time: Jun-12-2023
